Repairs
- How can I send a product in for repair?
- How do I describe the problem when I request a repair?
- Is it possible to get a repair estimate?
- What is the status of my repair?
- What is covered under warranty?
- Can I get replacement parts?
- Are there any repairs I can perform myself?
- How do I change the lens on my Stinger?
- Where is the spare bulb located in my Scorpion? How do I change it?
General
- What is the difference between lumens and candlepower?
- How do I convert Candlepower to Lumens?
- Why would I want LED? s instead of Xenon lamps?
- Is it possible to buy my products directly from Streamlight?
- When I buy Streamlight Apparel, am I buying directly from Streamlight?
Batteries
- Can I use rechargeable CR123 batteries in any of the Streamlight flashlights?
- Do I need to condition my lead-acid battery; drain it out and fully recharge it?
- Can the Streamlight Jr. Luxeon use batteries other than alkaline?
- Is there any way to prevent the rechargeable Ni Cd battery from developing a memory?
- Can I use rechargeable batteries with LED lights?
Chargers
- Can I use the same charge cord for different chargers?
- The red light on my steady charger does not light. What could cause this?
- What causes the red LED on the Strion charger to flicker?
- Can I charge a Strion with my Stinger charger holder?
- Does the SL20XP/LED take a different charger than the standard SL20XP? I have two new lights that I can’t get to charge. Suggestions?
- How can I tell when my flashlight is fully charged?
- I have the steady charger. Will the fast charger shorten the life of my battery?
Product Specific
- Can the Fire Vulcan be field-modified to have a mode in which the main bulb is steadily lighted and the taillights flash?
- Can I convert my SL-20, 20X, 20XP or 35X to an LED model?
- What is the difference between the Titanium TT-3C UV and the Black TT-3CUV?
- Is the 4AA waterproof and suitable for recreational diving?
- Can I mount a Stinger on a weapon?
- How do I sight-in the laser on my M6?
- My M6 seems to fit extremely tightly when I place it on a weapon other than a Glock. Is the M6 defective?
Repairs
Q: How can I send a product in for repair?
A: You can have an Authorized Service Center (ASC) in your area repair it. Click here locate one.
You can also send your light/charger to the factory for repair. A RA# is not needed for Repair or Warranty work:
Streamlight, Inc.
Attn: Repair Department
30 Eagleville Road
Eagleville, PA 19403-3996
Please include (inside the box):
- A copy of the receipt of purchase if available; if not available state date of purchase and from whom.
- A note which includes a description of the problem for each light or charger.
- Whether you require an estimate.
- Whether you require the bill to be sent to a different address.
- Your name and mailing address.
- A method which we can use to contact you: phone number, fax number, or email address.
When shipping, please use a carrier that can confirm delivery.
Q: How do I describe the problem when I request a repair?
A: Identify what is not operating properly and when it occurs.
Q: Is it possible to get a repair estimate?
A: Yes. Indicate on your packing slip that you request an estimate and how you can be contacted.
Q: What is the status of my repair?
A: E-mails should be sent to cs@streamlight.com and the Subject should be ATTENTION REPAIRS. Please indicate who you are, your address, phone number and the model of flashlight being repaired.
Q: What is covered under warranty?
A:Limited Lifetime Warranty
Streamlight warrants its products to be free of defect for a lifetime of use.*
We will repair, replace or refund the purchase price, at our option, of any Streamlight product that does not work or that you manage to break for as long as you own it.
Of course, this limited lifetime warranty excludes abuse, batteries, bulbs and chargers. Rechargeable batteries and chargers have a (1) one year warranty with proof of purchase. In any country or under any jurisdiction where specific restrictions exist on limited lifetime warranties, Streamlight offers a 10-year limited warranty.
*Excludes H.I.D LiteBox and M-series weapons mounted lights.
* See product for specific warranty.
Q: Can I get replacement parts?
A: Yes. There is a list of replacement parts in the ? Retail Price? section of this website.
Q: Are there any repairs I can perform myself?
A: Generally the batteries and bulbs of Streamlight products are user-serviceable. Some other repairs require complex procedures, special tools, and can void the warranty and/or approval rating of the flashlight (Those repairs should be performed only by The Factory or Authorized Repair Centers). Contact the Repair Department for specific information about a particular repair.
Q: How do I change the lens on my Stinger?
A: The Stinger lens can only be replaced with special tools. Return the Stinger to the factory or an Authorized Repair Center.
Q: Where is the spare bulb located in my Scorpion? How do I change it?
A: A spare bulb is located in the base of the lamp holder assembly. The Scorpion uses a high output xenon bi-pin light bulb. DO NOT TOUCH A HOT BULB. Allow the bulb to cool before handling. The bulb is under high internal pressure. ALWAYS WEAR SAFETY GLASSES WHEN HANDLING THE BULB. To change the bulb unscrew the head of the flashlight from the barrel. Firmly grasp the burned out bulb and pull it from the lamp holder assembly. To access the spare bulb turn the lamp holder assembly over so that the battery contact/cover is facing upwards. Remove the battery contact/cover by prying it upwards. The spare bulb is located in the recessed area in the center of the lamp holder assembly. Turn the lamp holder assembly over so that the bulb side is up. There are four holes visible in the bulb side of the lamp holder assembly. The pins of the bulb mount in the two holes that have square metal contacts abutting them. Carefully align the pins of the new bulb with the contact holes in the lamp holder. Push the bulb into the lamp holder. Use care to make sure that the pins are straight and that the bulb is firmly seated in place. Note: Don? t touch the new bulb with your fingers, If you do accidentally touch the bulb make sure to wipe it off thoroughly with a clean cloth.
General
Q: What is the difference between lumens and candlepower?
A: An explantion can be found in the Education Center.
Guide to Choosing the Right Light
Q: How do I convert Candlepower to Lumens?
A: The short answer is, you can’t. There is no universal method of measuring flashlight output, not even when the ratings are in the same units. A lumen rating is the total unfocused visible light output of EITHER (depending on the manufacturer) the bare bulb, or of the entire flashlight. A candlepower rating used by a flashlight manufacturer will usually be Peak Beam Candlepower. This is a calculated value based on measuring the hot spot in the focused beam and multiplying by a number found by squaring the distance between the photocell used for the measurement and the flashlight. What this number gives is the number of "standard candles" that would need to be burning to produce the same amount of illumination as the hot spot in the beam at the same distance as the measurement is taken. Because Peak Beam Candlepower is focused light and lumens refer to unfocused light, it is ABSOLUTELY IMPOSSIBLE to convert the two.
Q: Why would I want LED’s instead of Xenon lamps?
A: The choice of LED or Xenon largely depends on the application the light will be used for. LED’s can be good for close-in lighting for extended periods of time. Xenon is better for lighting objects at a distance.
Q: Is it possible to buy my products directly from Streamlight?
A: No. Streamlight uses a network of authorized dealers and distributors.
Q: When I buy Streamlight Apparel, am I buying directly from Streamlight?
A: No, but you are buying officially authorized logoed product.
Batteries
Q: Can I use rechargeable CR123 batteries in any of the Streamlight flashlights?
A: No. Streamlight products are optimized and the components can be damaged or destroyed by the use of anything other than the recommended battery type. The use of improper or substandard lithium batteries can be especially dangerous.
Q: Do I need to condition my lead-acid battery; drain it out and fully recharge it?
A: No. Routinely running the lamp until it extinguishes will drastically shorten the life of the battery.
Lead acid batteries need to be fully charged. The higher the average charge on the battery, the longer it lasts. Deliberately draining a lead-acid battery will quickly destroy it.
Q: Can the Streamlight Jr. Luxeon use batteries other than alkaline?
A: Nickel Metal Hydride AA replacement rechargeable batteries seem to work okay. However, since the product was designed for alkalines and we cannot possibly test all of the aftermarket replacements, we cannot recommend the use of any batteries other than alkalines.
Q: Is there any way to prevent the rechargeable Ni Cd battery from developing a memory?
A: Research has shown that the "memory effect" is a rare phenomenon and is almost nonexistent in high-drain applications such as flashlights.
Some tips to help prolong the life of Ni Cd batteries:
- The light should be returned to the charger when it is not in use.
- It should never be run until the battery is completely exhausted.
- Return the flashlight to the charger when it begins to dim.
Q: Can I use rechargeable batteries with LED lights?
A: Streamlight does not support the use of batteries other than those specifically listed in the instructions. Normally the lamps and current regulators are designed for a specific type of battery, and using other batteries often results in poor performance, either low output or extremely short lamp life, depending on the battery types involved.
Chargers
Q: Can I use the same charge cord for different chargers?
A: Generally yes. Streamlight charge cords use a common connector.
The exception to this is the Ultrastinger fast charge systems that must use either vehicle 12V DC or the heavy duty AC charge cord which is supplied with the system.
Q: The red light on my steady charger does not light. What could cause this?
A: First, see if there is power to the charger itself. Second, check to be sure that the flashlight is properly inserted into the charging system. If the red light still does not light the flashlight and charger should be returned for repair.
Q: What causes the red LED on the Strion charger to flicker?
A: As the battery approaches a fully charged state it is normal for the charger LED to alternate between lighting steadily and blinking. This process may take as long as 15 minutes to one half hour and does not indicate a charging problem.
Q: Can I charge a Strion with my Stinger charger holder?
A: No. The Stinger and the Strion are different sizes and their battery chemistries and charging systems are completely different.
Q: Does the SL20XP/LED take a different charger than the standard SL20XP? I have two new lights that I can’t get to charge. Suggestions?
A: The SL20XP/LEDs originally were shipped with a gray charger and that was the only charger that will work. The gray charger has an LED charge indicator since there are no LEDs on the switch housing. The flashlight’s switch housing is made of black opaque plastic.
The current version uses the old (black) charger. The new ones have a translucent dark red switch housing that glows when in the charger. These work with either grey or black chargers and are shipped with black chargers.
Q: How can I tell when my flashlight is fully charged?
A: Follow the guidelines in the instruction booklet included with the flashlight. Some products have a red and green light combination (Litebox, Vulcan). In that case green indicates a charged condition. Flashing red LED’s on the Stinger (fast) and Strion chargers indicate a charged condition.
Q: I have the steady charger. Will the fast charger shorten the life of my battery?
A: No. Batteries have an expected number of charge/discharge cycles (the number varies by the type of battery). Streamlight fast chargers safely revert to a maintenance charge rate after the battery has been charged.
Product Specific
Q: Can the Fire Vulcan be field-modified to have a mode in which the main bulb is steadily lighted and the taillights flash?
A: No. This would require a factory modification of the circuit board and is not currently available.
Q: Can I convert my SL-20, 20X, 20XP or 35X to an LED model?
A: No.
Q: What is the difference between the Titanium TT-3C UV and the Black TT-3CUV?
A: The titanium model features (6) 390 nm LED’s. The black version contains UV LED’s with 2 different nanometer ratings: (3) 375 nm LED’s and (3) 390 nm LED’s. The wavelength of the UV LED’s determine what types of UV images can be observed.
Q: Is the 4AA waterproof and suitable for recreational diving?
A: No. The 4AA really isn’t a diving light. Water pressure against the switch will turn it on at as little as 15 feet. The current rating is IP67 which is one meter for 30 minutes.
Q: Can I mount a Stinger on a weapon?
A: Streamlight does not currently make weapons mounts for the Stinger. We have not thoroughly tested the Stinger in weapons mounted applications although limited testing has shown no problems.
Q: How do I sight-in the laser on my M6?
A: There are two adjustment screws located on the laser housing (elevation and windage). There is only one distance where the bullet path will coincide with the laser. On a normal weapon, the sights are mounted above the bore line and are adjusted to look slightly down with relation to the bore line. When the weapon is fired, the bullet "climbs" (actually, a bullet DROPS from the bore line from the moment it first leaves the barrel, but the bore is tilted upward slightly so the bullet is physically traveling upward for a short distance), crosses the sight line, reaches its upward peak (the peak of the "mid-range trajectory" ), descends to cross the sight line a SECOND time, and after that it’s all downhill. How the sights are adjusted, along with the muzzle velocity of the bullet (a 10mm is faster than a .45, and a rifle faster yet), determine where these points occur. The user must decide how high above or below the sight line the bullet can be allowed to strike and adjust the sights accordingly. A laser is seldom mounted above the bore line. It is usually below or to the side. This means the bullet crosses the laser sight line ONLY ONCE. This point is the "zero range." For a laser mounted below the bore, at distances less than the zero range the bullet will be above the sight line. Beyond the sight line it will be below. The bullet will deviate from the sight line FASTER WITH A LASER than with conventional sights. If mounted to the side, the bullet will also deviate to the side of the laser line as well as up and down. In practice, an M6 on a handgun can be adjusted to keep the bullet strike within about 2" high and 2" low out to about 100 feet, which is better than most people, and a lot of guns, can shoot.
Q: My M6 seems to fit extremely tightly when I place it on a weapon other than a Glock. Is the M6 defective?
A: The M6 is designed for use on a Glock mounting-rail. Some weapons employ the dimensions and specifications of the Glock mounting rail while other weapons conform to the MIL-STD-1913 (Picatinny). The difference in the tolerances will affect the fit of the M6 on a weapon-mounting rail. It is important to maintain the original configuration of the M6. The mounting should not be modified as that could affect the reliability of the laser aiming system. In-house testing has shown that affixing the light to the mounting rail and allowing it to "set-up" for a few days can allow the mounting to conform more suitably. Additionally, try to fit the light onto the mounting rail without the locking-bar. If the light fits better the locking bar may need some adjustment to help improve the fit. The top of the locking bar may have a tiny amount of flash on it from the molding process. Lightly scraping this material away with a sharp knife or file should help the fit. Try not to be too aggressive at first. You may have to repeat the process several times to get a better fit. It is not necessary to remove much of the material.
That is a very interesting post. What kind of other repair works do you offer?
Do you do some more specific works like network equipment repairs or cell sites ?
Thanx
TT
We offer repair work for Emergency vehicles and sell equipment to outfit emergency vehicles. http://www.swps.com